dgaust.bsky.social
👤 Joined on 05 July 2023
6
Followers
11
Following
86
Total Posts
📜 Kullanıcı Geçmişi
- 05 Tem 2023, 06:20
🎉 Bluesky'e katıldı - İlk kullanıcı adı:
@dgaust.bsky.social - 09 Kas 2023, 23:22
🔄 Profil bilgileri güncellendi
🚫 Blokladığı Kullanıcılar
❤️ Beğendiği Gönderiler
This was the initial set I figured out - might be a couple of mistakes in there (not sure if I edited them back here) but a reasonably good guide. The Sigen sensor update cadence is not as regular as the Envoy ones so they can be out of sync sometimes.
Show PostThis tool is handy if you want to verify that the Modbus stuff is properly enabled while the installers are still on site. If it's like VIC - they will need to switch it off when they are done/and it won't be re-enabled again until the inspector comes out days later. sourceforge.net/projects/qmo...
Show PostYou may want to consider setting a static IP on the unit instead. The issue is system/inverter fires up when power is switched on (and at that point your switch/DHCP server has not yet booted up) & then it sometimes just ignores the reassignment of IP Addresses.
Show PostWe have switched to Globird now - we are exporting basically nothing now (and FiT is nearly 0 in VIC), so it's all about cheapest daily/per kW charges. They have a plan with 22c/kW for first 250kW per month and then 25c after that so works out well with the battery so far.
Show Post